To view this notification widget you need to have JavaScript enabled. This notification widget was easily created with NotifySnack.
Gain the Advantage with Fulton Vantage Condensing Hydronic Boiler

Gain the Advantage with Fulton Vantage Condensing Hydronic Boiler

The Fulton Vantage condensing hydronic boiler is a cutting edge unit with the capabilities to meet a wide range of needs.

These boilers have been engineered to provide the highest possible thermal efficiencies. It features a large heating surface area and burner turndown capabilities that provide high performance in a condensing boiler design.

Continue reading to learn more about the Fulton Vantage condensing hydronic boiler.

Fulton Vantage Condensing Hydronic Boiler Line

Recently expanded to include a 6,000,000 BTU/hr model, the Vantage line of boilers offer a traditional fire tube design and diverse burner configuration to meet the needs of ultra-high efficiency hydronic heating applications.

The full Vantage product line includes the following models:

  • VTG-2000
  • VTG-2000DF
  • VTG-3000
  • VTG-3000DF
  • VTG-4000
  • VTG-4000DF
  • VTG-5000
  • VTG-5000DF
  • VTG-6000
  • VTG-6000DF

The dual fuel boiler models from the list above include all the boilers containing “DF” at the end of the model name.

Fulton Dual Fuel Boiler

As the first boiler operating on #2 oil as a backup fuel, the Fulton Vantage condensing hydronic boiler takes advantage of old fuels in retrofit applications. When users choose #2 oil, the Vantage control system instinctively loads the proper fuel profile, which simplifies backup fuel switchover requirements.

This same simplicity exists for propane dual / natural gas fuel applications. With automatic fuel switchover capabilities, changing fuels is as simple as turning a switch. A few benefits of the dual fuel boiler include:

  • Direct spark oil ignition
  • Full BTU/HR input on both fuels
  • Doesn't require compressed air
  • No gas pilot required on oil

Heavy-Duty Engineering

The Fulton Vantage condensing hydronic boiler is a conventional firetube boiler designed with unparalleled heavy-duty engineering. The boiler boasts high thermal efficiencies and features a high-mass vessel bolstered by a superior duplex steel the design. This dual fuel boiler features a high-volume and high-mass pressure vessel, which provides a predictable and exceptional tolerance level for unpredictable and varying system conditions.

Optimized Architecture

Industrial Durability

It features large passageways and a fully-wetted furnace chamber to keep stresses low. This design also allows for full input without impingement of the flame on #2 fuel oil or gas. The architecture of the Vantage is bolstered by advanced materials.

State-of-the-Art Materials

The duplex alloy stainless steel heat exchanger features improved corrosion resistance, lower stresses, and superior strength over the conventional 439 and 316L grades typically used by the competition.

Durable Pressure Vessel

ASME-certified welders and precision robotics are responsible for the impeccable workmanship that is poured into each Vantage pressure vessel. These components are engineered to withstand the continuous requirements of high demand industrial and commercial applications. Zero-flow conditions will not harm the boiler.

Engineered for Variable Primary Flow

The variable primary flow piping method is simplified to reduce design complexity, enhance temperature control, and maximize efficiency. These benefits are gained through delivering the lowest temperature of water directly to the boiler without blending.

Modular Boiler Sequencing

The Fulton Vantage condensing hydronic boiler includes an optional ModSync touchscreen. This intuitive panel can easily integrate more than one Vantage boilers into a singular cohesive system. Modular boiler sequencing provides centralized intuitive monitoring for the entire plant. Some of the key attributes of the Fulton Vantage's modular boiler sequencing include:

Customized programs available that allow the control sequences to be individualized to the needs of the facilities' application.

Building integration Modbus, and configurable to BACnet

The Fulton Vantage offers excellent efficiency and performance. The highly optimized control matches system load to boiler output, which extends equipment life and minimizes boiler cycling.

Contact ATI of New York

The Fulton Advantage boiler is further enhanced by state-of-the-art controls as well as diverse burner configurations. This cutting-edge dual fuel boiler is an excellent option for a variety of industries, including:

Contact an ATI of New York specialist today to learn more about the Fulton Vantage condensing hydronic boiler.

About the Author

Commercial & Industrial Boiler Financing

Finance Any New Boiler Today with No Payments for 120 Days

Finance Weil-McLain Boilers with No Payments for 120 Days